Detailed Description

Project incoming short wave radiation from any slope (angle and azimuth) to any other slope.

This filter is useful to generate horizontal radiation values from measurements performed parallel to the slope or to generate slope-parallel values from horizontal measurements. It can also be used to correct for a sensor that tilted over time and therefore was not parallel anymore. It takes as arguments at least one set of angle/azimuth for the source and/or the destination sensor. It can actually project from any inclination to any other inclination. In case of self shading on the source sensor, the projected values will be set to nodata.

It takes the following arguments:

SRC_AZI and SRC_ANGLE: the inclination parameters (azimuth in degrees north, angle in degrees from the horizontal) from the source sensor (default: horizontal);
DEST_AZI and DEST_ANGLE: the inclination parameters (azimuth in degrees north, angle in degrees from the horizontal) from the destination sensor (default: horizontal);

Note: The angles and azimuth that are relevant are the ones measured at the sensor, not necessarily the slope under the sensor!

Author: Mathias Bavay

Date: 2024-06-14
ISWR::filter1 = PROJECT_RADIATION

ISWR::arg1::DEST_SLOPE = 35

ISWR::arg1::DEST_AZI = 180

#include <ProcRadProj.h>

Public Member Functions
	RadProj (const std::vector< std::pair< std::string, std::string > > &vecArgs, const std::string &name, const Config &cfg)

virtual void	process (const unsigned int &param, const std::vector< MeteoData > &ivec, std::vector< MeteoData > &ovec)

Public Member Functions inherited from mio::ProcessingBlock
virtual	~ProcessingBlock ()

virtual void	process (const unsigned int &param, const std::vector< MeteoData > &ivec, std::vector< MeteoData > &ovec)=0

virtual void	process (Date &dateStart, Date &dateEnd)

std::string	getName () const

const ProcessingProperties &	getProperties () const

const std::string	toString () const

bool	skipStation (const std::string &station_id) const
	Should the provided station be skipped in the processing? More...

bool	noStationsRestrictions () const

const std::vector< DateRange >	getTimeRestrictions () const

bool	skipHeight (const double &height) const
	Should the provided height be skipped in the processing? More...

Additional Inherited Members
Static Public Member Functions inherited from mio::ProcessingBlock
static void	readCorrections (const std::string &filter, const std::string &filename, std::vector< double > &X, std::vector< double > &Y)
	Read a data file structured as X Y value on each lines. More...

static void	readCorrections (const std::string &filter, const std::string &filename, std::vector< double > &X, std::vector< double > &Y1, std::vector< double > &Y2)
	Read a data file structured as X Y1 Y2 value on each lines. More...

static std::vector< double >	readCorrections (const std::string &filter, const std::string &filename, const size_t &col_idx, const char &c_type, const double &init)
	Read a correction file applicable to repeating time period. More...

static std::vector< offset_spec >	readCorrections (const std::string &filter, const std::string &filename, const double &TZ, const size_t &col_idx=2)
	Read a correction file, ie a file structured as timestamps followed by values on each lines. More...

static std::map< std::string, std::vector< DateRange > >	readDates (const std::string &filter, const std::string &filename, const double &TZ)
	Read a list of date ranges by stationIDs from a file. More...

Static Public Attributes inherited from mio::ProcessingBlock
static const double	default_height

Protected Member Functions inherited from mio::ProcessingBlock
	ProcessingBlock (const std::vector< std::pair< std::string, std::string > > &vecArgs, const std::string &name, const Config &cfg)
	protected constructor only to be called by children More...

Static Protected Member Functions inherited from mio::ProcessingBlock
static void	extract_dbl_vector (const unsigned int &param, const std::vector< MeteoData > &ivec, std::vector< double > &ovec)

static void	extract_dbl_vector (const unsigned int &param, const std::vector< const MeteoData * > &ivec, std::vector< double > &ovec)

Protected Attributes inherited from mio::ProcessingBlock
const std::set< std::string >	excluded_stations

const std::set< std::string >	kept_stations

const std::vector< DateRange >	time_restrictions

std::set< double >	included_heights

std::set< double >	excluded_heights

bool	all_heights

ProcessingProperties	properties

const std::string	block_name

Static Protected Attributes inherited from mio::ProcessingBlock
static const double	soil_albedo = .23

static const double	snow_albedo = .85

static const double	snow_thresh = .1
	parametrize the albedo from HS More...

Constructor & Destructor Documentation

◆ RadProj()

mio::RadProj::RadProj	(	const std::vector< std::pair< std::string, std::string > > &	vecArgs,
		const std::string &	name,
		const Config &	cfg
	)

Member Function Documentation

◆ process()

void mio::RadProj::process	(	const unsigned int &	param,
		const std::vector< MeteoData > &	ivec,
		std::vector< MeteoData > &	ovec
	)

virtual

Implements mio::ProcessingBlock.

The documentation for this class was generated from the following files:

Detailed Description

Public Member Functions

Additional Inherited Members

Constructor & Destructor Documentation

◆ RadProj()

Member Function Documentation

◆ process()